|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Ammonium Sulfate Sulphate Manufacturers, SDS MSDS Sheet
Ammonium Sulfate Ammonium Sulphate Pure & ACS Analytical Reaent FCC Food grade Manufacturers
Ammonium Sulfate SDS MSDS Sheet, Material Safety Data Sheet
Section1. Product Information
Product Name: Ammonium Sulphate or Ammonium Sulfate
Synonyms: Ammonium Sulfate, Diammonium Sulfate
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1
Section 2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazard not otherwise classified:
H320 May causes mild eye irritation.
H402: May be a little harmful to aquatic life.
Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P314: Get Medical advice/attention if you feel unwell.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P330: Rinse mouth.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P501 Dispose of contents/ container to an approved waste disposal plant.
Section 3. Composition/Information on Ingredients
Ingredient: Ammonium Sulfate
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1
Molecular Formula : (NH4)2SO4
Molecular Weight : 132,14 g/mol
Section 4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Skin: Wash promptly with soap and water and flush with water until chemical is removed. Remove any contaminated clothing and wash before reuse. Get medical attention for irritation.
Eyes: Flush promptly with plenty of water for at least 15 minutes. Get medical attention.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen if a qualified operator is available. Get medical attention for irritation or discomfort.
Ingestion: If conscious drink 2 to 4 glasses of water and induce vomiting by touching back of throat with finger.
Section 5. First Aid Measures
Flammable Properties
Flash Point: Not applicable
Auto-ignition Temperature: Not applicable
Extinguishing Media: Any standard agent may be used. If involved in a fire, flood with water.
Unusual Fire and Explosion Hazards: Ammonium Sulfate decomposes at elevated temperatures to produce toxic fumes of ammonia and sulfur oxides. If mixed with strong oxidizers such as ammonium nitrate or potassium salts (nitrite, nitrate or chlorate), a vigorous reaction may occur. Special Fire Fighting Precaution: Since toxic gases may be released violently at high temperatures, firefighters should wear full protective clothing and NIOSH approved, self contained breathing apparatus. Use water to keep fire exposed containers cool. Do not let the product enter drain.
Section 6. Accidental Release Measures
IN CASE OF SPILL OR OTHER RELEASE: Avoid inhalation of dust. Avoid contact with skin and eyes. (Always wear recommended personal protective equipment). Prevent further leakage or spillage if safe to do so. Shovel up large spills (dry chemicals) for use or disposal. Sweep up small spills and maximize recovery. Flush residue with water if permitted by applicable disposal regulations. Do not let the product enter drain.
Section 7. Handling and Storage
Normal Handling: (Always wear recommended personal protective equipment). Avoid contact with eyes, skin and clothing. Avoid breathing dust. Keep containers closed and avoid rough handling. Do not eat, drink or smoke when using this product. Wash contaminated clothing before reuse. Follow good personal hygiene and housekeeping practices.
Storage Recommendations: Store in a cool, dry place away from strong oxidizers, such as chlorates, nitrates and nitrites. Avoid Sources of ignition. Direct sunlight.
Section 8. Exposure Controls/Personal Protection
No Occupational Exposure Limits (OELs) have been established for this product or its chemical components. Keep it at <10mg/m3
Engineering Controls: Provide local exhaust, if dusty conditions prevail.
Personal Protective Equipment
Skin Protection: To minimize skin contact, wear long sleeved shirt, trousers and gloves for routine product handling and use.
Eye Protection: Under dusty or misty conditions, wear chemical safety goggles. Do not wear contact lenses.
Respiratory Protection: Where dusty or misty conditions require it, use a NIOSH approved dust or mist respirator for needed protection.
Additional Recommendations: None generally required.
Section 9. Physical and Chemical Properties
Appearance: Ammonium Sulfate is Colorless to dark brown crystals or granules
Physical State: Solid
pH: 5-6 at 5% water solution.
Molecular Weight: 132.14
Chemical Formula: (NH4)2 SO4
Odor: Odorless
Specific Gravity (water=1.0) 1.77
Solubility in Water: (Weight %) 38% solution @ 20C
pH: 5.5 (1.3% solution)
Boiling Point: > 280 °C (536 °F)
Melting Point: - 235 °C (-391 °F)
Section 10. Stability and Reactivity
Normally Stable (Conditions to Avoid): It is stable under normal conditions.
Incompatibles: Oxidizers; e.g. potassium salts -nitrate, nitrite, chlorate, also chlorine or hypochlorite. Strong acids & bases. Avoid contact with zinc-clad, copper and copper bearing materials.
Hazardous Decomposition Products: Ammonia and sulfur trioxide and sulfur dioxide gases.
Hazardous Polymerization: Will not occur.
Section 11. Toxicological Information
Immediate (Acute) Effects:
Acute Oral LD50 Rat: 2840 mg/kg
Acute Inhalation LC50 Rat: > 1000 mg/m³ 8 Hours
Acute Dermal: LD50 dermal rat: 2840 mg/kg (Rat)
Skin irritation - A single dermal dose of 0.5 g elicited transient (reversible) mild dermal irritation in the rabbit.
Delayed (Sub chronic and Chronic) Effects: Eye irritation - A single ocular dose of 100 mg elicited transient (reversible) moderate ocular irritation in the rabbit.
There was no evidence of skin sensitization seen in guinea pigs.
Section 12. Ecological Information
LC50 Fish-1: 5.2 - 8.2 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [static])
EC50 Daphnia-1: 423 mg/l (Exposure time: 24 h - Species: Daphnia magna)
LC 50 Fish-2: 32.2 - 41.9 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [flow-through])
EC50 Daphnia-2 14 mg/l (Exposure time: 48 h - Species: Daphnia magna)
EC50 Water flea (Ceriodaphnia dubia): 52 - 67 mg/l 48 hours
LC50 Pink salmon (Oncorhynchus gorbuscha): 0.068 mg/l 96 hours
LC50 Rainbow trout, donaldson trout (Oncorhynhus mykiss): 35.2 - 43.8 mg/l 96 Hours
Bioaccumulation: Not expected to bioaccumulate on the basis of the low octanol-water partition coefficient.
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Section 13. Disposal Considerations
Other Disposal Considerations: The product is a fertilizer, therefore, waste ammonium sulfate might be used as a fertilizer. If discarded to waterways, it may promote eutrophication. Disposal must be in accordance with applicable disposal regulations. Users should consult with appropriate regulatory agencies before discharging or disposing of waste material.
Section 14. Transport Information
DOT (USA) &ADR/RID: Not Regulated
IMDG: Not dangerous goods
IATA: Not dangerous goods
Section 15. Regulatory Information
USA Regulations:
SARA Section 311/312: Hazard Classes Immediate (acute) health hazard
TSCA: Listed on the United States TSCA (Toxic Substances Control Act) inventory
Listed on States List:
U.S. - Massachusetts - Right To Know List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
U.S. - Pennsylvania - RTK (Right to Know) List
Canada WHMIS: Not controlled under WHMIS (Canada).
Canada Domestic Substances List (DSL) Yes
Canada Non-Domestic Substances List (NDSL) No
EINECS EC Number: 231-984-1
Section 16. Other Information
Disclaimer:***************************
Our company provides this Ammonium Sulfate Sulphate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Ammonium Sulfate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************
Ammonium Sulphate manufacturers
Ammonium Sulfate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
