|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Potassium Alum, Aluminum Potassium Sulfate, Potash Alum Manufacturers, SDS MSDS Sheet
Potassium Alum SDS MSDS Sheet, Material Safety Data Sheet Aluminium Potassium Sulphate
1. PRODUCT DESCRIPTION
Product Name: Potassium alum, Potash alum, Aluminum potassium sulphate dodecahydrate, Potassium aluminum sulphate dodecahydrate.
CAS Number: 7784-24-9
EINECS EC Number: 233-141-3
Molecular Formula: AlK(SO4)2.12H2O
Molecular Weight: 474.39
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS & Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
HMIS (Perceived): Health hazard: 0, Flammability: 0, Physical hazards: 0
NFPA (Perceived): Health hazard: 0, Fire: 0, Reactivity Hazard: 0
3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name: Potassium Alum
CAS Number: 7784-24-9
EINECS EC Number: 233-141-3
Percentage: 95-100%
4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Potassium Alum is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.
5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire. Oxides of Sulfur Aluminium and Potassium may arise on decomposition.
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
6. SPILL OR LEAK PROCEDURES
Steps to be taken in Case Potassium Alum is Released or Spilled: Avoid dust formation. Avoid breathing vapors, mist or gas. Ventilate area of leak or spill. Wear appropriate personal protective equipment. Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water.
7. SPECIAL PRECAUTIONS
Keep Potassium Alum in a well closed container stored under cold to warm conditions. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. SPECIAL PROTECTION INFORMATION
Contains no substances with occupational exposure limit values.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation Local Exhaust: Yes
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.
9. PHYSICAL DATA
Molecular Formula: AlK(SO4)2.12H2O
Molecular Weight: 474.39
Appearance and Odor: Potassium Alum is white crystalline powder or granules, odorless.
pH: >3
Melting Point: 92-93C.
Boiling Point: NA
Density: 1.76 g/cm3 at 20 °C
Percent Volatile by Volume: 0 (21C)
Solubility in Water: Soluble in water.
10. REACTIVITY DATA
Stability: Potassium Alum is stable
Conditions to Avoid: Heat, humidity
Incompatibility (Materials to Avoid): Strong oxidizing agents.
Hazardous Decomposition Products: Sulphur, Aluminium & Potassium oxide
Hazardous Polymerization: Will not occur.
11. TOXICITY DATA
Toxicity Data: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.
12. ECOLOGICAL DATA
Toxicity to fish: Not available.
Bioaccumulative potential: Does not bioaccumulate.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose Potassium Alum in accordance with all applicable Federal, State and Local regulations.
14. TRANSPORT INFORMATION
DOT (USA) & ADR/RID: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.
15. REGULATORY INFORMATION
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Canada WHMIS: Not Listed
Disclaimer:
***************************
Our company provides this Potassium Alum or Aluminum Potassium
Sulfate SDS information sheet contained herein in good faith but makes no
representation as to its comprehensiveness or accuracy. This Potash
Alum Potassium
Alum or Aluminum Potassium Sulphate MSDS sheet
is intended only as a guide to the appropriate precautionary
handling of the material by a properly trained person using this
product. Individuals receiving the information must exercise their
independent judgment in determining its appropriateness for a particular
purpose.
***************************
Potash Alum Potassium Alum manufacturers
Aluminum Potassium Sulfate Sulphate Manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
