|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Diacetate Manufacturers, SDS MSDS Sheet
Sodium Diacetate Manufacturers
Sodium Acetate BP USP IP ACS AR & Food Grade
Sodium Diacetate SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product
Product Name: Sodium diacetate, Sodium di acetate
CAS#: 126-96-5
EINECS EC number: 204-814-9
Chemical Formula: C4H7O4Na+xH2O
Molecular Weight: 142.09 C4H7O4Na
FEMA Number: 3900
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Serious eye damage/eye irritation Category 2A
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Word: Warning
Hazard statements:
H319: Causes serious eye irritation.
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May cause mild respiratory irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi = Irritant
R41 = Risk of serious damage to eyes.
Section 3: Composition and Information on Ingredients
Name Sodium diacetate
CAS #.: 126-96-5
EINECS EC number: 204-814-9
% by Weight: 100
Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact: After contact of Sodium Diacetate with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available for Sodium Diacetate.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Products of Combustion: These products are carbon oxides (CO, CO2). Some metallic oxides.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid Sodium diacetate in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions: Keep containers dry. Keep away from heat. Keep away from sources of ignition. Empty containers of Sodium diacetate pose a fire risk, evaporate the residue under a fume hood. Ground all equipment. Do not breathe dust. Never add water to Sodium di acetate. In case of insufficient ventilation, wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes
Storage: Keep containers dry. Keep in a cool place. Ground all equipment containing material. Keep containers tightly closed. Keep Sodium diacetate in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: Not available.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid crystalline or powder.
Odor: Acetic acid.
Molecular Weight: 142. g/mole
Color: Sodium diacetate is white.
pH (1% solution/water): 5
Melting Point: 328C (622.4F)
Dispersion Properties: See solubility in water, diethyl ether.
Solubility: It is easily soluble in cold water, hot water.
Section 10: Stability and Reactivity Data
Stability: Sodium diacetate or di acetate is stable under good condition of storage.
Corrosivity: Sodium diacetate or di acetate is non-corrosive in presence of glass.
Polymerization: No.
Section 11: Toxicological Information
Toxicity to Animals:
LD50 Rat dermal >2,000 mg/kg
LD50 Rats oral 5,600 mg/kg
CARCINOGENIC EFFECTS: Not listed as carcinogen by NTP, I.A.R.C. Monographs or OSHA
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Section 12: Ecological Information
Aquatic toxicity (acute):
LC50/fish: 184,7 mg/l
EC50 >1.000 mg/l aquatic invertebrates 48 hours
Results of PBT and vPvB assessment: This substance is not considered to be persistent, bioaccumulating nor toxic (PBT)., This substance is considered to be very persistent and very bioaccumulating (vPvB).
Section 13: Disposal Considerations
Waste Disposal: To be done as per local regulations.
Section 14: Transport Information
DOT & ADR/IRD: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.
Section 15: Other Regulatory Information
USA:
TSCA 8(b) inventory: No products were found.
Canada WHMIS : CLASS D-2B: Material causing other toxic effects (TOXIC).
Section 16 - Additional Information
Disclaimer:
***************************
Our company provides this Sodium diacetate
SDS information sheet contained herein in good faith but makes no
representation
as to its comprehensiveness or accuracy.
This Sodium diacetate
MSDS sheet is intended only as a guide to the appropriate precautionary handling
of the material by a properly trained person using this product. Individuals
receiving the information must exercise their independent judgment in
determining its appropriateness for a particular purpose.
***************************
Sodium Diacetate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
