|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Stearate Manufacturers, SDS MSDS Sheet
Sodium Stearate Manufacturers IP BP USP-NF
Sodium Stearate SDS MSDS Sheet, Material Safety Data Sheet
SECTION 1 - IDENTIFICATION OF THE PRODUCT AND THE COMPANY
Product Name: Sodium Stearate
Chemical Name: Sodium Salt of Stearic Acid
CAS No.: 822-16-2
EINECS EC Number: 212-490-5
Chemical Formula: Na (C18H35O2)
Molecular Weight: 306.46
SECTION 2 - HAZARD IDENTIFICATION OF THE PREPARATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May form combustible dust concentrations in air.
May cause mild skin irritation.
May cause mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient: Sodium Stearate
CAS No.: 822-16-2
EINECS EC Number: 212-490-5
Percentage: 100%
SECTION 4 - FIRST-AID MEASURES
Always seek medical attention after first aid measures are provided.
Skin: Immediately remove any contaminated clothing. Wash contaminated area thoroughly with soap and copious amounts of water for at least 15 minutes. If irritation or adverse symptoms develop, seek medical attention.
Eyes: Remove any contact lenses at once. Flush eyes with water for at least 15 minutes. Ensure adequate flushing by separating the eyelids with fingers. If irritation or adverse symptoms develop, seek medical attention.
Ingestion: Contact a physician immediately.
Remove to fresh air, if coughing, breathing becomes labored, irritation develops or other symptoms develop, seek medical attention at once, even if Inhalation symptoms develop several hours after the exposure.
SECTION 5 - FIRE-FIGHTING MEASURES
Flash Point: >350F (C.O.C).
Auto Ignition Temperature.: >700F.
Fire Extinguishing Media: Water spray, foam, carbon dioxide or dry chemical.
Special Fire Fighting Procedures: Burning will produce toxic fumes. Firemen should be equipped with SCBA with a full face piece operated in the positive pressure demand mode with appropriate turnout gear and chemical resistant personal protective equipment.
Unusual Fire & Explosion Hazards: Concentrated dust may present an explosion hazard.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Steps to be taken in the event of spill or release: Remove all sources of ignition. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Clean up spills of Sodium stearate in a manner that does not disperse dust into the air. Use non-sparkling tools and equipment. Reduce airborne dust and prevent scattering by moistening with water. Pick up spill for recovery or disposal and place in a closed container.
SECTION 7 - HANDLING AND STORAGE
Handling: Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process of capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostatic discharge. DO NOT USE NEAR FOOD OR DRINK. Avoid eye contact. Use with adequate ventilation. Reseal containers immediately after use.
Storage: Keep Sodium stearate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage.
SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION
Respiratory Protection: Work ambient concentrations should be monitored and if airborne concentrations are expected to exceed acceptable levels wear a NIOSH/MSHA approved dust air purifying respirator. When using respirators refer to OSHA’s 29CFR 1910.134.
Ventilation: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below level of overexposure.
Eye Protection: Safety goggles recommended. Permanent eyewash is highly recommended.
Hand Protection: Protective gloves recommended.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance & Odor: Sodium stearate is fine white powder with slight fatty odor.
Specific Gravity: (Water=1) 1.0
Solubility in Water; Soluble.
Evaporation rate: <1 (ethyl ether =1)
Flash Point: >350F, C.O.C.
% Volatile by volume: 1.0 Moisture.
SECTION 10 - STABILITY AND REACTIVITY
Incompatibility: Avoid contact with peroxides, strong mineral acids and strong oxidizing agents.
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide and sodium oxide.
Hazardous Polymerization: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
Intravenous: Dog--LDLo: 10 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
SECTION 12 - ECOLOGICAL INFORMATION
The product should be prevented from entering drains, sewers, streams, etc.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
SECTION 13 - DISPOSAL CONSIDERATIONS
Prevent material from entering drains, sewers, streams, etc. Immediately dispose of waste material in accordance with federal, state and local regulations.
SECTION 14 - TRANSPORT INFORMATION
DOT (US): Not dangerous goods
ADR/RID: Not dangerous goods
TDG/IMDG: Not dangerous goods
IATA: Not dangerous goods
SECTION 15 - REGULATORY INFORMATION
USA Regulations:
TSCA 8(b) inventory: Sodium stearate
WHMIS (Canada): CLASS D-2B: Material causing other toxic effects (TOXIC).
Disclaimer:
***************************
Our company provides this Sodium Stearate SDS information sheet contained
herein in good faith but makes no representation as to its comprehensiveness
or accuracy. This Sodium Stearate MSDS sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
***************************
Sodium Stearate Manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
