|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Ammonium Bromide Manufacturers, SDS MSDS Sheet
MSDS of Ammonium Bromide
Ammonium Bromide BP FCC
ACS AR Analytical Reagent Food Grade Manufacturers
Ammonium Bromide SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Identification
Product Name: Ammonium bromide
EINECS EC No.: 235-183-8
Chemical Formula: NH4Br
CAS No: 12124-97-9
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:
Serious eye damage/eye irritation Category 2A
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Warning
Hazard statements:
H319: Causes serious eye irritation.
Precautionary statements:
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC:
Xi Irritant; R36
For the full text of the H-statement & R-phrases mentioned in this Section, see Section 16.
OSHA Hazards: Target organ effect, Target Organs: Central nervous system.
HMIS (Perceived): Health hazard 1, Flammability 0, Physical hazards 0
NFPA (Perceived): Health hazard 1, Fire 0, Reactivity hazard 0
Section 3: Composition and Information on Ingredients
Composition Name: Ammonium Bromide
CAS #:: 12124-97-9
EINECS EC No.: 235-183-8
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Get medical attention.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician. immediately. Loosen tight clothing such as a collar, tie, belt or waistband.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Instructions: appropriate to extinguish fire.
Special Hazards Arising: Nitrogen oxides & hydrogen bromide gas
Extinguishing Media: In case of fire use water spray to cool fire expose containers. Use water spray, dry chemical, Carbon dioxide, or appropriate foam. Use agent most appropriate to extinguish fire.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Avoid generating dusty conditions. Avoid putting washings in the drain. Finish cleaning by spreading water on the contaminated surface and drain.
Section 7: Handling and Storage
Precautions: Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist before handling this product.
Exposure Limits: Not established.
Section 9: Physical and Chemical Properties
Physical state and appearance: White solid.
Molecular Weight: 97.94 g/mole
pH (1% soln/water): pH 5,0 - 6,5 at 50 g/l at 25C.
Boiling Point: Not available.
Melting Point: 452C, Sublimes.
Specific Gravity: 2.429 (Water = 1)
Vapor Pressure: Not applicable.
Solubility: Easily soluble in cold water. 970 g/l (25C)
Section 10: Stability and Reactivity Data
Stability: The product is stable under usual storage conditions.
Incompatibles: Strong oxidizing agents, Strong acids, Strong bases, Heavy metals, Silver salts, Potassium. It is sensitive to moisture.
Conditions to avoid: Incompatibilities, moisture, heat and direct sunlight.
Polymerization: Will not occur.
Section 11: Toxicological Information
Acute toxicity: LD50 Oral - rat: 2.700 mg/kg
Carcinogenicity: No components of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, ACGIH , NTP, OSHA
Section 12: Ecological Information
Ecotoxicity: Do not empty into drains..
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than regional or national regulations. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
Section 14: Transport Information
DOT (US) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Section 15: Other Regulatory Information
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Chronic Health Hazard
Massachusetts Right To Know Components: Ammonium bromide, CAS-No. 12124-97-9
Pennsylvania Right To Know Components: Ammonium bromide, CAS-No. 12124-97-9
New Jersey Right To Know Components: Ammonium bromide, CAS-No. 12124-97-9
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Canada WHMIS: Class D-2B: Poisonous and infectious material- Other effects- Toxic
Section 16: Other Information
EINECS EC No.: 235-183-8
H319 = Causes serious eye irritation.
Xi = Irritant
R36 = Irritating to eyes.
Disclaimer:
***************************
Our company provides this Ammonium Bromide SDS information sheet
in good faith
but makes no representation as to its comprehensiveness or accuracy. This
Ammonium Bromide MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using this
product. Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
***************************
Ammonium Bromide manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
