|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Disodium Phosphate Sodium Phosphate Dibasic Manufacturers, SDS MSDS Sheet
Mono
Monobasic Sodium
Phosphate Monobasic Monosodium Phosphate IP BP USP NF ACS Analytical Reagent
FCC Food grade Manufacturers
Di Dibasic Sodium
Phosphate Dibasic Disodium Phosphate IP BP USP NF ACS Analytical Reagent FCC
Food grade Manufacturers
Tri Tribasic
Sodium Phosphate Tribasic Trisodium Phosphate IP BP USP NF ACS Analytical
Reagent FCC Food grade Manufacturers
Mono Di Tri Sodium Phosphate
Commercial & IP grade Manufacturers
Sodium
Phosphate Monobasic Dibasic Tribasic BP USP IP ACS Analytical Reagent FCC Food Grade Manufacturers
Sodium Phosphate Dibasic SDS MSDS Sheet, Material Safety Data Sheet Disodium Phosphate
1. Product Identification
Synonyms: DSP; Disodium hydrogen phosphate, Di sodium phosphate.
CAS No.: 7558-79-4 for Anhydrous and 10039-32-4 for Dodecahydrate
EINECS EC Number: EC Number 231-448-7
Molecular Weight: 141.96 for Anhydrous and 358.14 for Dodecahydrate
Chemical Formula: Na2HPO4 for Anhydrous and Na2HPO4.12H20 for Dodecahydrate
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Di Sodium Phosphate, Disodium phosphate or Sodium Phosphate Dibasic or Dibasic Sodium Phosphate
CAS Number: 7558-79-4 98
EINECS EC Number: EC Number 231-448-7
Percent: 100%
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Di Sodium Phosphate.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: It is white granular powder. Hygroscopic.
Odor: Odorless.
Solubility: Sodium phosphate dibasic is soluble in water.
Specific Gravity: 2.07 @ 15C/4C
pH: No information found.
% Volatile by volume @ 21C (70F): 0
Melting Point: 240C (464F) Converts to Na4P2O7
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.
11. Toxicological Information
Oral rat LD50: 17 gm/kg. Skin rabbit, standard Draize, 500 mg/24H, mild. Eye rabbit, standard Draize, 500 mg/24H mild.
Carcinogenecity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC NTP ACGIH OSHA.
12. Ecological Information
Aquatic toxicity: LC50 1650 mg/l (Orfe, golden (Leuciscus Idus))
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Disodium phosphate container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
15. Regulatory Information
USA - TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No, Fire: No Pressure: No Reactivity: No (Pure / Solid)
Chemical Weapons Convention: No
Canada WHMIS : Not controlled under WHMIS (Canada).
EINECS EC Number: EC Number 231-448-7
Disclaimer:
****************************
Our company provides this
Di SODIUM PHOSPHATE, SODIUM
PHOSPHATE DIBASIC SDS information sheet contained herein in good faith but makes no
representation as to its comprehensiveness or accuracy. This DISODIUM
PHOSPHATE, DIBASIC SODIUM PHOSPHATE MSDS sheet is intended
only as a guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
****************************
Sodium Phosphate Dibasic manufacturers
Dibasic Sodium Phosphate manufacturers
Disodium Phosphate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
