Manufacturers Suppliers India

Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..

The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Home--------Contact/E-mail

Shipping By Sea Bulk Jumbo Packing Palletized and Shrink Wrapped Drum Packing Air Freighting Liquid Solution Bulk Packing

Monosodium Phosphate Sodium Phosphate Monobasic BP USP NF ACS Analytical reagent FCC Food grade Manufacturers

Mono Monobasic Sodium Phosphate Monobasic Monosodium Phosphate IP BP USP NF ACS Analytical Reagent FCC Food grade Manufacturers
Di Dibasic Sodium Phosphate Dibasic Disodium Phosphate IP BP USP NF ACS Analytical Reagent FCC Food grade Manufacturers
Tri Tribasic Sodium Phosphate Tribasic Trisodium Phosphate IP BP USP NF ACS Analytical Reagent FCC Food grade Manufacturers

Mono Di Tri Sodium Phosphate Commercial & IP grade Manufacturers
Sodium Phosphate Monobasic Dibasic Tribasic BP USP IP ACS Analytical Reagent FCC Food Grade Manufacturers

For MSDS Sheet Click Mono Sod. Phosph. MSDS

Monobasic Sodium Phosphate Monobasic

Mono Sodium Phosphate or Monosodium Phosphate (NaH2PO4, MSP), also known as anhydrous monobasic sodium phosphate or monosodium phosphate or sodium phosphate monobasic, is used as a laxative and, in combination with other sod. phos., as a pH buffer.

The pKa is 7.20. The sodium chloride equivalent value, or E-Value, is 0.49. It is soluble in 4.5 parts water. Monosodium phosphate is most commonly available as colorless crystals or a white powder. Sodium phosphate monobasic is insoluble in alcohol.

Specification Monosodium Phosphate Crystals
Sodium Phosphate Monobasic
Monosodium Phosphate Anhydrous
Sodium Phosphate Monobasic
P2O5 Content
Assay
Loss on Drying
pH of 2% Solution
Insoluble
Packing
44%
98%
Less than 24%
4.4-5
0.025%
50 Kg HDPE Bags
59%
98%
1%
4.4-5
0.5%
50 Kg HDPE Bags

Sodium Phosphate Monobasic ACS

Reagent Chemicals
ACS Specificatios
Sodium Phosphate, Monobasic, Monohydrate
Sodium Dihydrogen Phosphate Monohydrate
NaH2PO4 . H2O
Formula Wt 137.99
CAS Number 10049-21-5

REQUIREMENTS
Assay: 98.0-102.0% NaH2PO4 - H2O
pH of a 5% solution: 4.1-4.5 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 5 ppm
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Potassium (K): 0.01%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%

Sodium Dihydrogen Phosphate Monohydrate BP

NaH2PO4,H2Oıı 138.0ıı 10049-21-5
Action and use
Excipient.

DEFINITION
Sodium Dihydrogen Phosphate Monohydrate contains not less than 98.0% and not more than 100.5% of NaH2PO4, calculated with reference to the dried substance.

CHARACTERISTICS
Colourless crystals or a white powder.
Very soluble in water; very slightly soluble in ethanol (96%).
Dissolve 10.0 g in sufficient carbon dioxide-free water prepared from distilled water to produce 100 ml (solution S).

IDENTIFICATION
A. Solution S is faintly acid.
B. Solution S yields the reactions characteristic of phosphates.
C. Solution S neutralized with a 10% w/v solution of potassium hydroxide yields reaction A characteristic of sodium salts.
D. Complies with the test for Loss on drying.

TESTS
Acidity
pH of a mixture of 5 ml of solution S and 5 ml of carbon dioxide-free water , 4.2 to 4.5.
Clarity and colour of solution
Solution S is clear and colourless.
Arsenic
0.5 g complies with the limit test for arsenic - 2 ppm.
Heavy metals
12 ml of solution S complies with limit test A for heavy metals. Use lead standard solution (1 ppm Pb) to prepare the standard (10 ppm).
Iron
10 ml of solution S complies with the limit test for -  iron 10 ppm.
Chloride
Dilute 2.5 ml of solution S to 15 ml with water. The resulting solution complies with the limit test for chlorides - 200 ppm.
Sulphate
To 5 ml of solution S add 0.5 ml of hydrochloric acid and dilute to 15 ml with distilled water. The resulting solution complies with the limit test for sulphate - 300 ppm.
Reducing substances
To 5 ml of solution S add 0.25 ml of 0.02M potassium permanganate and 5 ml of 1M sulphuric acid and heat in a water bath for 5 minutes. The solution retains a slight red colour.
Loss on drying
When dried to constant weight at 130°, loses 11.5 to 14.5% of its weight. Use 0.5 g.

Monobasic Sodium Phosphate USP NF

Monobasic Sodium Phosphate
NaH2PO4·xH2O
(anhydrous) 119.98
Phosphoric acid, monosodium salt, monohydrate.
Monosodium phosphate monohydrate 137.99 [10049-21-5]
Phosphoric acid, monosodium salt, dihydrate
Monosodium phosphate dihydrate 156.01 [13472-35-0]
Anhydrous [7558-80-7]

Monobasic Sodium Phosphate contains one or two molecules of water of hydration, or is anhydrous. It contains not less than 98.0 percent and not more than 103.0 percent of NaH2PO4, calculated on the anhydrous basis.

Identification— A solution (1 in 20) responds to the tests for Sodium 191 and for Phosphate.
pH: between 4.1 and 4.5, in a solution containing the equivalent of 1.0 g of NaH2PO4·H2O in 20 mL of water.
Water: less than 2.0% (anhydrous form); between 10.0% and 15.0% (monohydrate); between 18.0% and 26.5% (dihydrate).
Insoluble substances— Dissolve a portion equivalent to 10.0 g of NaH2PO4·H2O in 100 mL of hot water, filter through a tarred filtering crucible, wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 20 mg (0.2%).
Chloride— A portion equivalent to 1.0 g of NaH2PO4·H2O shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Sulfate
— A portion equivalent to 0.20 g of NaH2PO4·H2O shows no more sulfate than corresponds to 0.30 mL of 0.020 N sulfuric acid (0.15%).
Aluminum, calcium, and related elements— A solution containing the equivalent of 1.0 g of NaH2PO4·H2O in 10 mL of water does not become turbid when rendered slightly alkaline to litmus paper with 6 N ammonium hydroxide.
Arsenic—the limit is 8 ppm.
Heavy metals—the limit is 0.002%.

Sodium Phosphate Monobasic FCC

Monosodium Phosphate; Sodium Biphosphate;
Monosodium Dihydrogen Phosphate
NaH2PO4 Formula wt, anhydrous 119.98
NaH2PO4·H2O Formula wt, monohydrate 137.99
INS: 339(i) CAS: anhydrous [7558-80-7]
CAS: monohydrate [10049-21-5]

DESCRIPTION
Sodium Phosphate, Monobasic, is anhydrous or contains one or two molecules of water of hydration and is slightly hygroscopic. The anhydrous form occurs as a white, crystalline powder or granules. The hydrated forms occur as white or transparent crystals or granules. All forms are freely soluble in water, but are insoluble in alcohol. The pH of a 1:100 solution is between 4.1 and 4.7.
Function: Buffer; emulsifier; nutrient.

REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Phosphate and for Sodium.
Assay: Not less than 98.0% and not more than 103.0% of NaH2:PO4 after drying.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 2.0%; Monohydrate: Between 10.0% and 15.0%; Dihydrate: Between 20.0% and 25.0%.

Mono Monosodium Phosphate Monobasic Sodium Phosphate Monobasic ACS Analytical Reagent BP USP NF FCC Food Grade manufacturers:

MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.

e-mail: info@mubychem.com

Old Spice: Manufacturing since more than Three Decades:-
Ammonium Chloride Sodium Acetate
Calcium Chloride Sodium Diacetate
Magnesium Chloride Sodium Thiosulfate
Potassium Chloride Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals-
Aluminium Potassium Sulphate Ammonium Bicarbonate
Ammonium Chloride Ammonium Sulfate
Calcium Chloride Boric Acid
Calcium Phosphate Calcium Oxide
Gentian Violet Chromic Chloride
Manganese Sulfate Magnesium Sulfate
Potassium Acetate Maleic Acid
Sodium Phosphate Sodium Acetate
Sodium Propionate Sodium Thiosulfate
Benzyl Alcohol Borax; Sodium Borate
Calcium Hydroxide Calcium Sulfate
Calcium Saccharate Citric Acid
Magnesium Chloride Manganese Chloride
Methylene Blue Potassium Chloride
Potassium Hydroxide Sodium Bicarbonate
Potassium Phosphate Sodium Hydroxide
Zinc Chloride Zinc Sulfate
Other Best Seller Products:
Ammonium Persulfate Sodium Chloride
Ammonium Phosphate Sodium Formate
Aluminum Chloride Sodium Monochloro Acetate
Barium Chloride Sodium Propionate
Calcium Nitrite Nitrate Sodium Phosphate
Ceric Ammonium Nitrate Butylated Hydroxyanisole
Calcium Propionate Butylated Hydroxytoluene
Cupric Chloride Tertiary Butylhydroquinone
Ferrous Sulfide Isatoic Anhydride
Magnesium Sulfate Zinc Sulphate
Potassium Iodide Zinc Ammonium Chloride Galvanizing Flux
Potassium Bromide Methyl & Dimethyl Anthranilate
Potassium Phosphate Ammonical Etchant
Potassium Nitrate Nitrite Potassium Phthalimide
Sodium Formaldehyde Bisulfite Oil Field Chemicals
Sodium Bromide Calcium-Magnesium Acetate
Sodium Butyrate Isatoic Anhydride & Derivatives
Sodium Nitrite Nitrate  

Mono Monobasic Sodium Phosphate Monobasic Monosodium Phosphate IP BP USP ACS Analytical Reagent FCC Food grade Manufacturers

Global or International Monobasic Sodium Phosphate Monobasic or Monosodium Phosphate Suppliers, Exporters, Importers, Manufacturers