|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Thiosulphate Thiosulfate Pentahydrate Manufacturers, SDS MSDS Sheet
Hypo MSDS
MSDS of Sodium Thiosulphate Thiosulfate Anhydrous Manufacturers
Sodium Thiosulphate Thiosulfate Commercial Pentahydrate & Anhydrous
Manufacturers
Sodium Thiosulphate
Thiosulfate
Anhydrous Pentahydrate BP IP USP ACS AR Analytical Reagent FCC Food Grade Manufacturers
Sodium Thiosulfate Pentahydrate SDS GHS, MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Sodium thiosulfate pentahydrate; Ametox, Antichlor; Sodium Hyposulfite pentahydrate, Thiosulfuric Acid disodium salt pentahydrate; Sodium thiosulphate pentahydrate; Hypo pentahydrate; Sodothiol, Sulfothiorine.
CAS No.: 10102-17-7 for pentahydrate
EINECS: EC Number: 231-867-5
Molecular Weight: 248.18
Chemical Formula: Na2S2O3-5H2O
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May Causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Sodium thiosulfate pentahydrate
CAS No.: 10102-17-7 for pentahydrate
EINECS: EC Number: 231-867-5
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: May pose a fire hazard when exposed to elevated temperatures or by contact with an ignition source.
Products of Combustion: It emits toxic oxides of carbon and oxides of sulfur when heated to decomposition.
Fire: Sodium thiosulfate pentahydrate may ignite at high temperatures.
Explosion: An explosion may occur if triturated with nitrates, chlorates, or permanganates. Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source may pose dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide. Use means suitable for extinguishing surrounding fire. Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Sodium thiosulfate pentahydrate is white crystals or powder or granules.
Solubility: Readily soluble in water
pH: 6-9 at 1% solution at 25 C (77F)
Density: 1.73
Molecular Weight: 248.18
Molecular Formula: Na2S2O3-5H2O
% Volatiles by volume @ 21C (70F): 0
Melting Point: 48C
10. Stability and Reactivity
Stability: Sodium thiosulfate pentahydrate is stable under ordinary conditions of use and storage. Avoid heat and moisture.
Hazardous Decomposition Products: It emits toxic oxides of carbon and oxides of sulfur hydrogen sulfide along with sodium oxide when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Nitric acid, fluoride, sodium and potassium nitrate, strong oxidizers, mercury, chlorine, iodine and diketene.
Conditions to Avoid: Moisture, Heat, Incompatibles.
11. Toxicological Information
Toxicity to Animals:
LD50 Oral - rat - > 8.000 mg/kg on anhydrous basis.
LD50 Intraperitoneal - mouse - 5.200 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Mutagenic Effects: Not available. However it may have mutagenic effect.
Teratogenic Effects: Not available.
12. Ecological Information
Environmental Toxicity: Not available.
Environmental Fate: No information found. The product itself and its products of degradation are not toxic. This chemical is readily biodegradable and is not likely to bio-concentrate.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT (USA) & ADR/RID
Not Regulated
IMDG
Not Regulated
IATA
Not Regulated
15. Regulatory Information
USA:
SARA Codes: 10102-17-7: Not controlled.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: Not listed.
TSCA: CAS# 10102-17-7 is not on the TSCA Inventory because it is a hydrate.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Canada WHMIS Classifications: D2B
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations.
CAS# 127-09-3 is not listed on Canada's Ingredient Disclosure List.
Section 16 - Additional Information
Disclaimer:
***************************
Our company provides this Sodium thiosulfate pentahydrate SDS sheet in
good faith but makes no representation as to its comprehensiveness or
accuracy. This Sodium thiosulfate pentahydrate MSDS sheet is intended
only as a guide to the appropriate precautionary handling of the
material by a properly trained person using this product. The above
information has been compiled from various sources and has the
possibility of discrepancy and being out-dated information. Individuals
receiving the information must exercise their independent judgment and
do further search in determining its appropriateness for a particular
purpose. In no case shall our company be liable to loss or damages by
the product user.
***************************
Sodium Thiosulfate Thiosulphate Pentahydrate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
