 |
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Potassium Metabisulphite or Potassium Metabisulfite BP Ph Eur EP JP USP IP API FCC Food grade, Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
| The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals | |
--------
Potassium Metabisulphite or Potassium Metabisulfite BP Ph Eur EP JP USP IP FCC Food grade Manufacturers
For MSDS Sheet Click MSDS of Potassium Metabisulfite Metabisulphite IP BP USP FCC Food grade Manufacturers
Potassium Metabisulphite BP
K2S2O5 - 222.3 - 16731-55-8
DEFINITION
Potassium metabisulphite (potassium disulphite).
Content
95.0 per cent to 101.0 per cent.
CHARACTERS
Appearance
White or almost white powder, or colourless crystals.
Solubility
Freely soluble in water, slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. pH (see Tests).
B. To 5 ml of solution S (see Tests), add 0.5 ml of 0.05 M iodine. The mixture is colourless and gives reaction of sulphates.
C. Solution S gives reaction of potassium.
TESTS
Solution S
Dissolve 5.0 g in carbon dioxide-free water R and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
3.0 to 4.5 for solution S.
Thiosulphates
To 2.00 g add 25 ml of a 42.5 g/l solution of sodium hydroxide and 75 ml of water. Shake until dissolved and add 10 ml of formaldehyde and 10 ml of acetic acid. After 5 min, titrate with 0.05 M iodine using 1 ml of starch solution. Carry out a blank titration. The difference between the volumes consumed in the 2 titrations is maximum 0.15 ml.
Iron
Maximum 10 ppm.
Selenium
Maximum 10 ppm.
Zinc
Maximum 25 ppm.
Heavy metals
Maximum 10 ppm.
Potassium Metabisulfite USP
Potassium Metabisulfite
K2S2O5 222.33
Disulfurous acid, dipotassium salt.
Dipotassium pyrosulfite CAS 16731-55-8.
Potassium Metabisulfite contains an amount of K2S2O5 equivalent to not less than 51.8 percent and not more than 57.6 percent of SO2.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Sulfite.
Iron— Dissolve 1.00 g in 14 mL of dilute hydrochloric acid (2 in 7), and evaporate on a steam bath to dryness. Dissolve the residue in 7 mL of dilute hydrochloric acid (2 in 7), and again evaporate to dryness. Dissolve the resulting residue in a mixture of 2 mL of hydrochloric acid and 20 mL of water, add 3 drops of bromine TS, and boil to expel the bromine. Cool, and dilute with water to 47 mL: the limit is 0.001%.
Heavy metals— Dissolve 2 g in 20 mL of water, add 5 mL of hydrochloric acid, evaporate on a steam bath to about 1 mL, and dissolve the residue in 25 mL of water: the limit is 0.001%.
Potassium Metabisulfite FCC
Potassium Pyrosulfite
K2S2O5 Formula wt 222.31
INS: 224 CAS: 16731-55-8
DESCRIPTION
Potassium Metabisulfite occurs as white or colorless, free flowing crystals, crystalline powder, or granules. It gradually oxidizes in air to the sulfate. It is soluble in water, but it is insoluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant; bleaching agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Potassium and for Sulfite.
Assay: Not less than 90.0% of K2S2O5.
Lead: Not more than 2 mg/kg.
Iron: Not more than 10 mg/kg.
Selenium: Not more than 5 mg/kg.
Potassium Metabisulphite BP IP Potassium Metabisulfite USP FCC Food grade Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
