 |
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Iron Sulphide or Ferrous Sulfide, Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
| The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals | |
--------
Iron Sulphide Manufacturers; Ferrous Sulfide Manufacturers
For MSDS Sheet Click MSDS of Ferrous Sulfide Iron Sulphide Sulfide Manufacturers
Iron Sulphide or Ferrous Sulfide offered as Lumps, Powder and Sticks. Only high quality product is offered.
Specification of Ferrous Sulfide
| Assay as FeS | 80-85% |
| Fe Content | 70-73% |
| S Content | 28-32% |
Iron (II) sulfide is a chemical compound with the formula FeS. In practice, iron sulfides are often non-stoichiometric. Powdered iron sulfide is pyrophoric. FeS Ferrous Sulfide or Iron Sulphide can be obtained by reacting iron and sulfur. We can offer Ferrous Sulfide or Iron Sulphide in the form Sticks, Lumps and Powder.
Uses of Ferrous Sulphide
Ferrous Sulfide or Iron Sulphide sticks are widely used as a laboratory chemical for the preparation of Hydrogen Sulphide gas, by famous KIPP'S apparatus when comes in contact with dilute mineral acids.
In foundries, during electric melting, residual sulphur level decreases due to cleaner melting practices and the use of low sulphur steel scrap. It is found that iron does not readily respond to inoculants if Sulphur is below 0.04%. Then it is necessary to re-sulphurize by using Ferrous Sulphide or Iron Sulfide.
In Alloy And Stainless Steel Industries: To Control Hydrogen Embrittlement It is very convenient and economic to use Ferrous Sulphide or Iron Sulfide for re-sulphurization in these steels to hold the right level of 'S' and ensuring not to drop 'S' level.
Iron Sulphide is used as a re-sulphurizing agent in the production of carbon, alloy and stainless types of free cutting steels. It acts as an alloying agent to improve machine ability of steel castings which are used to manufacture various steel components.
Sulphur in form of Ferrous Sulphide or Iron Sulfide is added along with FeSi & FeMn to increase the 'S' contents of electrically melted iron. Addition of FeS influences white iron formation and obtain 'S' contents approximately 0.15%.
In Purification of Crude Phosphoric Acid Ferrous Sulphide or Iron Sulfide is used in cake form as a reducing agent to remove heavy metal impurities from phosphoric acid.
Elemental Sulphur has very low melting point and its tendency to float on the surface of molten metal resulting in the release of Sulphur dioxide, an undesirable gas which pollutes the working environment. Moreover, low melting eutectic brittle compounds form along the grain boundaries and mechanical properties are deteriorated. Hence Ferrous Sulphide or Iron Sulfide and not Sulphur is used for increasing sulphur content of Iron and Steel.
Ferrous Sulphide reacts with hydrochloric acid (HCl), the acidic properties of hydrochloric acid and the pungent fume of hydrogen sulfide can both be demonstrated:
FeS(s) + 2HCl(aq) → FeCl2 (aq) + H2S(g)
Specifications of Iron Sulphide or Ferrous Sulfide
Iron Sulphide | Specifications |
Iron Sulphide as FeS | 80-85% |
Iron Sulphide Sulfide manufacturers
Ferrous Sulfide Sulphide manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
