 |
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Galvanizing Flux and Zinc Ammonium Chloride, Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
| The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals | |
--------
Galvanizing Flux and Zinc Ammonium Chloride Manufacturers
For MSDS Sheet Click MSDS of Zinc Ammonium Chloride Galvanizing Flux Manufacturers
The product is offered as Mono, Double, Triple and Quad Salt
Type of Salt | Minimum Zinc Content | Ammonium Chloride Number (ACN) |
Zinc Ammonium Chloride Mono Salt (ZnCl2.NH4Cl) | 34.3% | 0.39 |
Zinc Ammonium Chloride Double Salt (ZnCl2.2NH4Cl) | 26.7% | 0.79 |
Zinc Ammonium Chloride Triple Salt (ZnCl2.3NH4Cl) |
21.9% | 1.18 |
Zinc Ammonium Chloride Quad Salt (ZnCl2.4NH4Cl) |
18.6% | 1.57 |
We are manufacturers of Zinc Chloride & Ammonium Chloride. We can offer the following proprietary products of Zinc Ammonium Chloride Galvanizing Flux
Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Wet Flux applications
(LOW FUMING and COST EFFECTIVE); Grade: AMIPM
Packed in 50 Kg HDPE bags or drums
Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Dry Flux applications
(LOW FUMING and FAST DRYING); Grade: AMILI
Packed in 50 Kg HDPE bags or drums
Zinc Ammonium Chloride based Proprietary Galvanizing Flux as 20-25 Baume Liquid
(PIPE GALVANIZING); Grade: AMILIPI
Packed in 200 Kg HDPE Barrels
AMIPM is a proprietary Galvanizing Flux based on Zinc Ammonium Chloride. It is LOW COST formulation for reduced fuming and typically used for continuous galvanizing lines (or new flux charge in a batch process). AMIPM is the preferred multi-component, cost-effective formulation. Zinc Ammonium Chloride based Proprietary Galvanizing Flux is extensively used in continuous sheet galvanizing lines as it contains special additives that offer high luster to galvanized products without the typical Sulphide smell that other high luster fluxes bear. Our Galvanizing Flux optimum melting point cleans the sheet before it enters the zinc bath, ensuring strong and uniform adhesion.
AMILI Zinc Ammonium Chloride Galvanizing Flux is formulated for high speed, low fuming, negligible ash and most importantly thin, strong and uniform Zinc coats. Use of our proprietary additives ensures thatthe flux dries to a simple film, which protects and seals the fluxed steel. Due to the improved fluxing action and a thinner lighter film, the flux dries up faster. The dryer the article to be galvanized is, the quieter it enters the kettle, hence less zinc is splattered about.
The uniform film that is formed over the article to be galvanized due to our special additives, acts as a protective layer over the Iron, ensures that less iron is introduced into the kettle, reducing dross formation.
Zinc Ammonium Chloride Manufacturers
Galvanizing Flux Manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
