 |
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Potassium Sodium Tartrate IP BP Ph Eur EP IP JP USP API ACS FCC Food grade, Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
| The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals | |
--------
Potassium Sodium Tartrate IP BP Ph Eur EP IP JP USP ACS FCC Food grade Manufacturers
For MSDS Sheet Click MSDS of Potassium Sodium Tartrate IP BP USP ACS FCC Food grade Manufacturers
Potassium Sodium Tartrate Tetrahydrate BP
Potassium Sodium Tartrate Tetrahydrate
C4H4KNaO6,4H2O -- 282.2 -- CAS 6381-59-5
DEFINITION
Potassium sodium (+)-(2R,3R)-2,3-dihydroxybutanedioate tetrahydrate.
Content
98.0 per cent to 101.0 per cent (anhydrous substance).
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless, transparent crystals.
Solubility
Very soluble in water, practically insoluble in alcohol.
IDENTIFICATION
A. It complies with the test for specific optical rotation.
B. It gives reaction of tartrates.
C. It gives reaction of potassium.
D. It gives reaction of sodium.
TESTS
Solution S
Dissolve 5.000 g in carbon dioxide-free water, prepared from distilled water, and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S, add 0.1 ml of phenolphthalein solution. Not more than 0.5 ml of 0.0 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Specific optical rotation
+ 28.0 to + 30.0 (anhydrous substance), determined on solution S.
Chlorides
Maximum 100 ppm.
Sulphates
Maximum 50 ppm.
Ammonium
Maximum 40 ppm.
Barium and oxalates
To 5 ml of solution S, add 3 ml of calcium sulphate solution R. Allow to stand for 5 min. Any opalescence in the solution is not more intense than that in a mixture of 3 ml of calcium sulphate solution and 5 ml of distilled water.
Calcium
Maximum 200 ppm.
Heavy metals
Maximum 10 ppm.
Water
24.0 per cent to 26.5 per cent, determined on 50.0 mg.
Potassium Sodium Tartrate USP
Potassium Sodium Tartrate
C4H4KNaO6·4H2O 282.22
Butanedioic acid, 2,3-dihydroxy-, [R-(R*,R*)]-, monopotassium monosodium salt, tetrahydrate.
Monopotassium monosodium tartrate tetrahydrate CAS 6100-16-9 and CAS 6381-59-5
Anhydrous 210.16 CAS 304-59-6
Potassium Sodium Tartrate contains not less than 99.0 percent and not more than 102.0 percent of C4H4KNaO6, calculated on the anhydrous basis.
Identification—
A: Ignite it: it emits the odor of burning sugar and leaves a residue that is alkaline to litmus and that effervesces with acids.
B: To 10 mL of a solution (1 in 20) add 10 mL of 6 N acetic acid: a white, crystalline precipitate is formed within 15 minutes.
C: A solution (1 in 10) responds to the tests forTartrate.
Alkalinity— A solution of 1.0 g in 20 mL of water is alkaline to litmus, but after the addition of 0.20 mL of 0.10 N sulfuric acid no pink color is produced by the addition of 1 drop of phenolphthalein TS.
Water: between 21.0% and 27.0%.
Limit of ammonia— To pass the test
Heavy metals: 0.001%.
Sodium Potassium Tartrate FCC
Potassium Sodium Tartrate; Rochelle Salt; Seignette Salt
KOOCCH(OH)CH(OH)COONa·4H2O
C4H4KNaO6·4H2O Formula wt 282.22
INS: 337 CAS: 304-59-6
DESCRIPTION
Sodium Potassium Tartrate occurs as colorless crystals or as a white, crystalline powder. As it effloresces slightly in warm, dry air, the crystals are often coated with a white powder. It is a salt of L(+)-tartaric acid. One gram dissolves in 1 mL of water. It is practically insoluble in alcohol.
Function: Buffer; sequestrant.
REQUIREMENTS
Identification:
A. Upon ignition, a sample emits the odor of burning sugar and leaves a residue that is alkaline to litmus and that effervesces with acids.
B. Add 10 mL of acetic acid to 10 mL of a 1:20 aqueous solution. A white, crystalline precipitate forms within 15 min.
C. A1:10 aqueous solution gives positive tests for Tartrate.
Assay: Not less than 99.0% and not more than 102.0% of C4H4KNaO6·4H2O after drying.
Alkalinity: Passes test.
Lead: Not more than 2 mg/kg.
Water: Between 21.0% and 26.0%.
ACS Specifications
American Chemical Society
Potassium Sodium Tartrate Tetrahydrate ACS
2,3-Dihydroxybutanedioic Acid, Potassium Sodium Salt, Tetrahydrate
KNaC4H4O6-4H2O
Formula Wt 282.22
CAS Number 6381-59-5
REQUIREMENTS
Assay: 99.0-102.0% KNaC4H4O6 . 4H2O
pH of a 5% solution: 6.0-8.5 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ........... 0.005%
Chloride (Cl) ............... 0.001%
Phosphate (PO4) ........ 0.002%
Sulfate (SO4) .............. 0.005%
Ammonium (NH4) ...... 0.002%
Calcium (Ca) .............. 0.005%
Heavy metals (as Pb) .. 5 ppm
Iron (Fe) ..................... 0.001%
Potassium Sodium Tartrate BP IP Sodium Potassium Tartrate USP ACS Analytical Reagent FCC food grade Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
